The DSC7500 swing beam barricade is designed to close off one or two lanes of a roadway and provide counter terrorist level protection against vehicle attack. The barricade stops a 15,000-pound (66.7 kN) vehicle traveling 50 mph (80 kph) with zero penetration, equivalent to 1.2-million foot-pounds of kinetic energy. It meets the K12 crash certification standard set by the United States Department of State.
DSC7500
The DSC7500 is supplied as an easy to use manual gate or powered with full automation features. Other versions of the DSC7500 Series include a full swing gate with anti-climb features that can replace existing non-rated swing gates.
A cantilevered sliding gate with the DSC7000 series crash beam is also available with the full crash rating.
The DSC7500 has been tested to the United Kingdom BSI Standard PAS:68 2007 CrashTest. 7.5 Tonne EU truck at 80 kph. Zero penetration. The beam held and was wedged in place. Second attack readiness demonstrated.
Barrier Clear Opening. The standard clear opening shall be 144 inches (3,66 M) as measured inside to inside of the hinge and locking buttress. The Barrier can be specified
with a clear opening up to 360 inches [9,14 M].
Delta Scientific certifies the The DSC7000 beam has been tested to the United Kingdom BSI Standard PAS:68 2007 in the DSC7500 configuration. Crash tested with a 7.5 Tonne EU truck at 80 kph. Zero penetration. The beam held and was wedged in place. Second attack readiness
