The LR-2000™ is a UHF RFID reader designed for Automatic Vehicle Identification (AVI) and access control applications, including parking entry and gate control. Its electronics and fine-tuned antenna are integrated into a compact single-unit enclosure.
The reader uses passive RFID credentials and supports applications for vehicle identification as well as access for people at doorways, elevators, and hospital entrances. It provides simultaneous Wiegand and RS-232 data output for integration with standard access control systems.
The LR-2000 operates in the 902–928 MHz UHF band and provides read ranges of up to 25 feet. AWID identifies the LR-2000 as discontinued, with the LR-3000 listed as its replacement.
Applications
- Automatic vehicle identification
- Parking entry and gate control
- Doorway access
- Elevator access
- Hospital entrance access
Features
- Read range up to 25 feet
- Integrated reader and antenna
- Passive RFID technology
- Programmable read repetition rate
- Wiegand and RS-232 data output
Design & Construction
- Compact 8 × 8 × 1.125-inch enclosure
- Integrated RHCP patch antenna
- Molded ABS plastic housing
- 1/8-inch aluminum back plate
- Outdoor installation with minimum IP64-rated housing
Technical Specifications
| Specification | Value |
|---|---|
| Product | LR-2000™ |
| Product Type | UHF long-range RFID reader |
| Frequency | 902–928 MHz (FHSS) |
| RF Power | 1W (30 dBm) |
| Antenna | 1 integrated RHCP patch antenna |
| Read Range | Up to 25 ft |
| Data Interface | Wiegand and RS-232, simultaneous |
| Input Voltage | +7 to +15 VDC |
| Housing | Molded ABS plastic with 1/8-inch aluminum back plate |
| Operating Temperature | -31°F to 113°F (-35°C to 45°C) at 100% duty cycle |
| Operating Humidity | 0–95%, non-condensing |
| Status | Discontinued; LR-3000 is the replacement |