The 9100 Commercial is designed to operate vehicular slide gates in residential and commercial applications. It can be configured for front, center, or rear drive and mounted on a concrete pad or post.
The operator provides a 1/2 HP continuous-duty motor and supports gates up to 30 feet long and 1,000 pounds under the manufacturer’s stated conditions. It includes automatic magnetic limits, partial-open and anti-tailgating functions, selectable loop operation, and an auto-close timer.
The 9100 features a fail-safe release, plug-in loop detector ports, Gate Tracker™ reporting output, two 115 VAC convenience outlets, and a built-in power switch and alarm reset switch.
Applications
- Residential vehicular slide gates
- Commercial properties
- Small multi-family residential properties
- High-traffic properties
- Class I, II, III and IV applications
Features
- 1/2 HP continuous-duty motor
- Automatic magnetic limits
- Partial-open and anti-tailgating features
- Gate Tracker™ reporting output
- Fail-safe release
Design & Construction
- Front, center, or rear drive configuration
- Concrete pad or post mounting
- G90 galvanized steel frame
- Steel or polypropylene cover options
- Single cog belt primary reduction
Technical Specifications
| Specification | Value |
|---|---|
| Product | 9100 Commercial |
| Product Type | Vehicular slide gate operator |
| Maximum Gate Length | 30 ft |
| Maximum Gate Weight | 1,000 lbs |
| Motor | 1/2 HP continuous-duty |
| Input Power | 115 VAC, 5.4 A |
| Operating Speed | Approximately 10 in./sec |
| Auto-Close Timer | 1–23 sec |
| Mounting | Concrete pad or post |
| Frame | G90 galvanized steel |
| Primary Reduction | Single cog belt |
| Operating Temperature | 10°F to 140°F |
| Chain | 20 ft of #40 roller chain |
| Dimensions — Metal Cover | 12″ W × 24″ H × 11.5″ D |
| Safety Compliance | UL 325 and UL 991; ETL Listed |