The DKS 9024 DC Slide Gate Operator is designed for residential and commercial slide gate applications. It can operate from 115/230 VAC with battery backup or from 24 VDC solar power, providing continued operation when AC power is unavailable.
The operator uses a 1/2 HP Quadra Drive heavy-duty DC motor and a belt-driven 30:1 gear reduction system. It features adjustable limit nuts, a manual T-handle release, built-in battery backup, and an advanced microprocessor control circuit.
The 9024 is available for pad or post mounting and includes entrapment prevention, selectable loop/reverse functions, an auto-close timer, and Gate Tracker data output.
Applications
- Small multi-family residential properties
- Commercial properties
- Industrial properties
- Residential slide gates
- Commercial slide gates
Features
- Built-in battery backup
- Solar power capability
- 30:1 heavy-duty gearbox
- Quadra Drive DC motor
- Gate Tracker data output
Design & Construction
- Heavy-duty corrosion-protected steel frame
- 1/4-inch polypropylene cover
- Belt-driven 30:1 gear reduction
- Pad or post mounting
- Front-access manual T-handle release
Technical Specifications
| Specification | Value |
|---|---|
| Product | 9024 Residential and Commercial |
| Product Type | DC slide gate operator |
| Motor | 1/2 HP Quadra Drive DC motor |
| Maximum Gate Weight | 1,000 lbs |
| Maximum Gate Length | 40 ft |
| Mounting | Pad or post |
| Input Voltage | 115/230 VAC or 24 VDC solar |
| Gear Reduction | 30:1 |
| Operating Speed | Approximately 1 ft/sec |
| Battery Backup | Built-in, two 7.2 Ah batteries |
| Loop Detector Ports | 2 |
| Operating Classes | I, II, III, IV |
| Cover | 1/4-inch polypropylene |
| Frame | 3/16-inch corrosion-protected steel |
| Safety Compliance | UL 325 and UL 991; ETL Listed |